Change spark plugs on a 2017 Jeep Renegade – This guide will help you through the steps. You do not need many tools. Let’s get started!
Why Change Spark Plugs?
Spark plugs are very important. They help start the engine. Over time, they wear out. When this happens, the engine may not run well. Changing spark plugs keeps your Jeep running smoothly.
Credit: www.youtube.com
Tools You Will Need
Before you start, gather your tools. Here is what you need:
- New spark plugs (4 for a 4-cylinder engine)
- Spark plug socket
- Socket wrench
- Extension bar
- Torque wrench
- Anti-seize compound
- Dielectric grease
- Gloves
- Safety glasses
Steps to Change Spark Plugs
1. Prepare Your Jeep
First, make sure your Jeep is cool. Do not work on a hot engine. Turn off the engine and let it sit for a while. Put on your gloves and safety glasses.
2. Locate The Spark Plugs
Next, open the hood. Find the spark plugs. They are usually on top of the engine. You may need to remove the engine cover. Use your socket wrench to do this.
3. Remove The Ignition Coils
Each spark plug has an ignition coil. Remove the coil first. Unplug the electrical connector. Then, use your socket wrench to remove the bolt. Pull the coil out carefully.
4. Remove The Old Spark Plugs
Now, it is time to remove the old spark plugs. Use your spark plug socket and extension bar. Turn the spark plug counterclockwise. Be gentle. Once it is loose, pull it out.
5. Check The Old Spark Plugs
Look at the old spark plugs. Are they dirty or damaged? This can tell you a lot about your engine. If they are dirty, your engine may have problems. If they are clean, you are doing great.
6. Install The New Spark Plugs
Take your new spark plugs. Apply a small amount of anti-seize compound to the threads. This helps when you need to remove them later. Carefully insert the new spark plug. Turn it clockwise by hand. Then, use your torque wrench to tighten it. Do not overtighten.
7. Reinstall The Ignition Coils
Put a small amount of dielectric grease on the ignition coil boot. This helps with the connection. Place the coil back over the new spark plug. Secure it with the bolt. Reconnect the electrical connector.
8. Repeat For All Spark Plugs
Repeat these steps for each spark plug. Remember to work carefully and take your time.
9. Finish Up
After all spark plugs are changed, reattach the engine cover if you removed it. Close the hood. Start the engine. It should run smoothly. If you hear any strange noises, check your work.
Credit: www.jeeprenegadeforum.com
Tips for Success
- Use the right tools. This makes the job easier.
- Work in a clean area. This prevents dirt from getting into the engine.
- Take your time. Rushing can cause mistakes.
- Keep your owner’s manual handy. It has important information.
Frequently Asked Questions
What Tools Do I Need To Change Spark Plugs?
You need a socket wrench, spark plug socket, and extension bar.
How Often Should I Change Spark Plugs On A 2017 Jeep Renegade?
Replace spark plugs every 30,000 miles or as per the manual.
Can I Change Spark Plugs Myself On A Jeep Renegade?
Yes, with basic tools and some mechanical knowledge, you can.
Where Are The Spark Plugs Located In A 2017 Jeep Renegade?
Spark plugs are in the engine, under the ignition coils.
Do I Need To Disconnect The Battery Before Changing Spark Plugs?
Yes, disconnecting the battery is a safety precaution.
What Is The Gap Setting For Spark Plugs In A 2017 Jeep Renegade?
The gap setting is 0. 030 inches. Check the manual for accuracy.
How Do I Know If My Spark Plugs Need Replacing?
Look for signs like poor engine performance or misfiring.
What Are The Benefits Of Changing Spark Plugs?
New spark plugs ensure better engine performance and fuel efficiency.
Conclusion
Changing spark plugs on a 2017 Jeep Renegade is simple. Follow these steps and tips. You can do it yourself. This saves money and keeps your Jeep running well. Happy driving!
